Transformerless Large-Diaphragm FET Condenser Microphone with 3 Polar Patterns, 10dB Pad, and 70Hz Highpass Filter
 
Warm Audio WA-47jr Large-diaphragm FET Condenser Microphone Features:
Fully discrete, transformerless signal path
Custom ’47-style k47 34mm gold-sputtered, dual-diaphragm, single–back plate, 6 micron Mylar capsule
Toshiba FETs, Wima film capacitors, Panasonic electrolytic capacitors
Cardioid, figure-8, and omnidirectional polar patterns
10dB pad; 70Hz highpass filter
Self-noise: 9dBA
Dynamic range: 138dBA
Maximum SPL: 147/157dB (at 1kHz, 1 Kohm, 0.5% THD, 0/-10dB)
Frequency range: 20Hz–20kHz
Sensitivity: 10mV/Pa or -40dB
Output impedance: 100 ohms
Rated load impedance: ≥1 Kohm
Maximum output: 16dBu at 1kHz, 1 Kohm, 0.5% THD
S/N ratio: 85dBA (IEC651)
Equivalent noise: 9dBA (IEC651)
Dynamic range: 138dBA (IEC651)
48-volt phantom powered
3-pin gold-plated XLR connector
Includes shockmount, hardmount, and zipper storage pouch
 
Tech Specs
Microphone Type:   FET Transformerless Condenser 
Polar Pattern:   Cardioid, Figure-8, Omidirectional 
Diaphragm Size:   Dual large diaphragm 
Frequency Range:   20Hz-20kHz 
Max SPL:   147dB SPL, 157dB with pad 
Output Impedance:   100 ohms 
Signal to Noise Ratio:   85dB (A weighted) 
Self Noise:   9dB (A weighted) 
Low Cut Filter:   70Hz 
Pads:   -10dB 
Color:   Silver 
Connector:   XLR 
Power Source:   48V phantom power 
Dimensions:   8.2" x 2.04" 
Weight:   1.1 lbs. 
Included Accessories:   Shockmount 
Manufacturer Part Number:   WA-47jr