Neumann KM 184 Pair Features:
 
Neumann KM 184 (Stereo Pair) condenser mic
Of the "FET100" series with a transformerless microphone circuit
Capsule with cardioid pickup pattern
Exceptionally low inherent self-noise (16dB A weighted)
Exceptionally high overload capacity (up to 138dB SPL before overload)
Exceptionally clear sound reproduction free of coloration
Very smooth frequency curves parallel to 0 degrees sound incidence
 
 
Specifications
 
Pressure gradient transducer
Cardioid pattern
20Hz to 20kHz frequency range
12mV/Pa (-36.2dBu = +38.4 dBv) sensitivity
50 ohms rated impedance
Equivalent loudness level due to inherent noise: 16dB (DIN/IEC 651dB-A), 25dB (CCIR 468-3 weighted)
S/N ratio re:1Pa @ 1kHz, (CCIR 468-3 weighted) 69dB (S/N = 94dB - equiv. noise) A-weighted: 78dB
Max SPL for less than 0.5% THD: 138dB
Total dynamic range of the microphone amplifier (Max SPL self-noise): 122dB
Current consumption: 2mA
Weight: 80g
Dimensions: Length 107mm, Diameter 22mm
Requires +44-volt to +52-volt phantom power
Includes wooden case, pop filter, 2 clips, operating instructions, and warranty card
 
 
Tech Specs
 
Microphone Type:Condenser
Mono/Stereo:Stereo Pair
Polar Pattern:Cardioid
Frequency Response:20Hz-20kHz
Max SPL:138dB SPL
Output Impedance:50 ohms
Signal to Noise Ratio:81dB (A weighted)
Self Noise:13dB (A weighted)
Color:Silver
Connector:XLR